Home  Contents                                                                                                           

Dynagrip Products

 

   

Up

 


 



METALLIC SEAL-UP 250mL
Part No. 1008
Permanently seals cracks in:
· Engine blocks
· Radiators
· Heads
· Head gaskets
· Heater cores
· Welsh plugs
· Fills holes up to 0.762mm deep
· Fills cracks 0.381mm wide
Made in Australia
 
 


CARGO
DIELECTRIC GREASE

Part No. 13101
Dielectric Grease is ideal for protecting electrical connections against corrosion, water and resistance.

When used on battery terminals, it reduces corrosion and allows correct resistance free contact and voltage to the vehicle electrical system.

Dielectric Grease is ideal for use on spark plugs and leads, allowing easier installation and removal whilst ensuring a good contact is made.

 

 


CARGO
NON-METALLIC ANTI-SEIZE

Part No. 13102
Non-Metallic Anti Seize composition eliminates seizing while providing maximum protection against seizure, heat freeze, galling rust and corrosion.
Formulated for aluminium engine blocks and heads to prevent galvanic and solubility seizing.
Works equally well on cast iron, alloys, steel, stainless steel, titanium, copper, brass and plastics.

 

 



QUIKSTEEL EPOXY PUTTY
Part No. 16002
Mixes like putty, bonds like epoxy, hardens like steel.
· 266ºC temperature resistant.
· 3 year shelve life.
· Sets up under water.
· Impervious to most chemicals.
· Bond holds to -67ºC.
· Permanently bonds to: Copper, Steel, PVC, Fibreglass, Plastics, Glass, Ceramics, Wood etc.
· Can be drilled, tapped, filed, machined, sanded and painted.


QuikSteel,
Strong enough
to lift a car!

IDEAL FOR REPAIR OF: Petrol and diesel fuel tanks, water tanks, swimming pool equipment, exhaust systems, boats, automobiles, trucks, plumbing, farm machinery, home, camping equipment, and hundreds of other applications.

 


QUIKSTEEL REINFORCED
EPOXY PASTE

Part No. 17002

Easy to use:
Mixes instantly. Fills cracks & holes. Withstands 266ºC. Sets in 5 minutes.

Steel Strong Epoxy Weld:
Permanently bonds to all types of Metals, Glass, Fibreglass, Ceramic, Plastic, PVC and more.

Hardens like Steel:
Can be drilled, Tapped, filed, machined, sanded and painted.



DYNACARE
FLAT OUT
Part No. 20015


Instantly seals and inflates punctures in car, truck and 4WD tyres.
 




DYNAGRIP
BLACK RTV SILICONE GASKET MAKER
Part No. 47200

Temperature resistant up to 260˚C.
Safe for use on oxygen sensor equipped vehicles.
Oil resistant. Low odour.
OEM Approved.
Fast curing.
Safe for all cars.
Made in USA.
 


 

DYNAGRIP
BLUE RTV SILICONE GASKET MAKER
Part No. 47203

Temperature resistant up to 260˚C.
Safe for use on oxygen sensor equipped vehicles.
Oil resistant. Low odour.
OEM Approved.
Fast curing.
Safe for all cars. Made in USA.
 

 


DYNAGRIP
CLEAR RTV SILICONE GASKET MAKER
310ML
Part No. 49201

Temperature resistant up to 260˚C.
Safe for use on oxygen sensor equipped vehicles.
Remains flexible.
Seals windows & windshields.
Fast curing.
Made in USA.
 

 


DYNAGRIP
RED RTV SILICONE GASKET MAKER
Part No. 49202

Temperature resistant up to 343˚C.
Safe for use on oxygen sensor equipped vehicles.
Oil resistant.
Low volatile.
Fast curing.
Made in USA.
 
 

 


DYNAGRIP
BLUE RTV SILICONE GASKET MAKER
Part No. 47203

Temperature resistant up to 260˚C.
Safe for use on oxygen sensor equipped vehicles.
Oil resistant. Low odour.
OEM Approved.
Fast curing.

 


DYNAGRIP
CLEAR RTV SILICONE GASKET MAKER
Part No. 49204

Temperature resistant up to 260˚C.
Safe for use on oxygen sensor equipped vehicles.
Remains flexible.
Seals windows & windshields.
Fast curing.
Made in USA.
 

 


DYNAGRIP
BLACK RTV SILICONE GASKET MAKER
310ML
Part No. 49290

Temperature resistant up to 260˚C.
Safe for use on oxygen sensor equipped vehicles.
Oil resistant. Low odour.
OEM Approved.
Fast curing.
Safe for all cars.
Made in USA.
 

 


DYNAGRIP
RED RTV SILICONE GASKET MAKER
310ML
Part No. 49292


Temperature resistant up to 343˚C.
Safe for use on oxygen sensor equipped vehicles.
Oil resistant.
Low volatile. Fast curing.
Made in USA.

 
 


DYNAGRIP
NO.2 SOFT GASKET SEALER
Part No. 49311

Seals gaskets used on stamped metal parts. Is ideal for sealing frequently serviced flexible assemblies.
Seals and repairs most cut cork or paper gaskets. Fills uneven flange surfaces Ideal for sump, rocker covers, water pumps. Suitable for welsh plugs.
Dries slowly, sets to a pliable film and remains flexible.
Resistant to oil, water, anti-freeze and propane.
Has a working temperature up to 205ºC and will withstand pressure of up to 2068 Kpa.
Australian made.

 


REAR VIEW MIRROR ADHESIVE
Part No. 49401

DynaGrip® Rear View Mirror Adhesive professionally bonds rear view mirror to windshield, sets in seconds. Mirror can be mounted to button after 10-15 minutes.
The two-part formula is adhesive and primer. In it’s set format DynaGrip® Rear View Mirror Adhesive can withstand a holding strength of 3000psi. DynaGrip® Rear View Mirror Adhesive can withstand temperatures of 121ºC.
 


 


SUPER GLUE LIQUID
Part No. 49403

Formulated to give instant and high strength bond to metals, plastics, china and rubber.
Designed for use on non-porous surfaces
 


 


SUPER GLUE GEL
Part No. 49404

Formulated to give instant and high strength bond to metals, plastics, china and rubber.
Designed for use on porous, non-porous and uneven surfaces.
 
 

 


PLASTIC WELD
Part No. 49408


DynaGrip® Plastic Weld is a scientifically formulated structure adhesive designed to bond fibreglass, vinyls, ABS, steel, aluminium, acrylics, polycarbonate, PET, wood, concrete, stainless steel and rubber.
· Ideal for joining dissimilar plastics or metals.
· Resistant to fuels and oils.
Can be painted when dry.




 
· 5 MIN EPOXY ADHESIVE
Part No. 49409

Ideal for the repair of: Cermaics, glass, automotive trim and fabric, wood, metals, fibreglass, rubber, concrete and most plastics.
· Dries crystal clear, super strong and waterproof
 

 

DYNAGRIP
MUFFLER PUTTY
Part No. 49411

DynaGrip® Muffler and Tailpipe Sealant is recommended for the repair of exhaust system connections. Apply before assembly to effectively prevent leaks.
DynaGrip® muffler and Tailpipe Sealant is easy to use and has a high temperature rating.
Asbestos free. Australian made.
 
 
 


DYNAGRIP
MUFFLER BANDAGE
Part No. 49413

Ideal permanent repair for leaking exhaust systems.
An impregnated epoxy resin that will withstand temperatures up to 260ºC (500ºF).
Ensures that no poisonous gases can escape.
 

 


WEATHERSTRIP
& TRIM ADHESIVE
Part No. 49429

DynaGrip® Weatherstrip Adhesive is a black liquid of brushing viscosity. It forms a strong, permanent bond between the following materials: rigid PVC sheet, polyurethane foams of the polyester and polyether types, supported PVC leather cloths, leather, polyester glass fibre, rubber sheet, hardboard, chipboard, wood painted or unpainted metals, rigid laminated plastics, furniture, footwear and much more.
Made in Australia

 

 


CONTACT & TRIM ADHESIVE 50ML
Part No. 49430

DynaGrip® Contact and Trim Adhesive is suitable for joining wood, chipboard, leather, metals, plaster, automotive trim and upholstery, cork, rubber, laminates, floor tiles and much more. DynaGrip® Contact and Trim Adhesive is ideal for use on most porous materials. Available in 50mL, 250mL and 500mL.
Made in Australia
 

 

 
CONTACT & TRIM
ADHESIVE 500ML
Part No. 49432

DynaGrip® Contact and Trim Adhesive is suitable for joining wood, chipboard, leather, metals, plaster, automotive trim and upholstery, cork, rubber, laminates, floor tiles and much more. DynaGrip® Contact and Trim Adhesive is ideal for use on most porous materials.
Made in Australia
 
 

 


Part No. 49441
Medium Strength Threadlocker.

· Fills gaps up to 0.18mm around bearing housings protecting against loosening.
· Resistant to oil, water, transmission fluids, glycol products and mild acids.
· Works within a temperature range of -59ºC to 148ºC.
· Break-away torque of 11.29 - 16.94 N.m.
 


 

 


REMOVABLE
THREADLOCKER 50ML
Part No. 49442

Medium Strength Threadlocker.
· Fills gaps up to 0.18mm around bearing housings protecting against loosening.
· Resistant to oil, water, transmission fluids, glycol products and mild acids.
· Works within a temperature range of -59ºC to 148ºC.
· Break-away torque of 11.29 - 16.94 N.m.
 

 


PERMANENT
THREADLOCKER 10ML
Part No. 49451

Medium/High Strength Threadlocker.
· Fills gaps up to 0.25mm around bearing housings protecting against loosening.
· Resistant to oil, water, transmission fluids, glycol products and mild acids.
· Works within a temperature range of -59ºC to 148ºC.
· Break-away torque of 14.68 - 28.24 N.m.
 

 


PERMANENT
THREADLOCKER 50ML
Part No. 49452

Medium/High Strength Threadlocker.
· Fills gaps up to 0.25mm around bearing housings protecting against loosening.
· Resistant to oil, water, transmission fluids, glycol products and mild acids.
· Works within a temperature range of -59ºC to 148ºC.
· Break-away torque of 14.68 - 28.24 N.m.

 
 


WICKING
THREADLOCKER 6ML
Part No. 49461

Low Viscosity Threadlocker.
The wicking action of the product searches into voids in locking PRE-ASSEMBLED parts into place.
· Resistant to oil, water, transmission fluids, glycol products and mild acids.
· Works within a temperature range of -59ºC to 148ºC.
· Break-away torque of 4.52 - 16.94 N.m.
 

 


ANAEROBIC
GASKET MAKER 50ML
Part No. 49477

DynaGrip® Anaerobic Gasket Maker is a solvent free compound formulated for locking, sealing, retaining and bonding metal parts. Stable in the presence of air, this product cures when placed between mating metal surfaces, forming a resilient, vibrationproof polymer shim. Ideally suited for joints that require no gasket but require a leak proof joint.
 
 


DYNAGRIP
DISC BRAKE SQUEAL FREE
AEROSOL
Part No. 49662

Specially formulated elastometric formulation that dampens the vibration that causes disc brakes to squeal and squeak.
When applied it forms a high temperature, water resistant film to silence disc brake squeal.
 



RAIN VISION
TOWELETTE
Part No. NA125

Exterior glass treatment for improving driver visibility.
Makes glass so slick that rain will not stick to it.




NEVER FOG
TOWELETTE
Part No. NA128

Anti fog shield ideal for interior glass, mirrors and eyeglasses.
Quick and easy to use.
 

 


RAIN VISION
118ML
Part No. NA25BC

Exterior glass treatment for improving driver visibility.
Makes glass so slick that rain will not stick to it.


 


NEVER FOG
118ML
Part No. NA28BC

Anti fog shield ideal for interior glass, mirrors and eyeglasses.
Quick and easy to use.


 

CARGO
BRUSH ON ELECTRICAL TAPE
BLACK
Part No. NA55

Use anywhere a dependable weather-proof connection and seal is required.
Quick drying formula.
Great for hard to tape places.


 


CARGO
BRUSH ON ELECTRICAL TAPE
RED
Part No. NA58

Use anywhere a dependable weather-proof connection and seal is required.
Quick drying formula.
Great for hard to tape places.

CarGo Chemicals was founded in Houston, Texas in 1959 to manufacture and distribute the highest quality automotive repair chemicals, epoxy products and high temperature cold welds in the world. Today, CarGo still holds to their quality commitment.
EVERY CarGo brand product is formulated with 100% active ingredients.
CarGo sells only products that are manufactured by CarGo or with the direction from CarGo by other wholly owned companies of SOUTHWEST CORPORATION.
Products are researched and formulated at CarGo Chemical's headquarters in Conroe, Texas. CarGo is a wholly owned subsiduary of RECTORSEAL. RECTORSEAL is wholly owned by SOUTHWEST CORPORATION, a public traded company.
Brand names owned and manufactured by CarGo Chemicals include: Quiksteel, Quikbronze, Thermosteel and Seal-Up. CarGo brand products are distributed world wide.

 

USE THE LEFT HAND MENU WHEN ENTERING SHOP!

CLICK ME TO ORDER DYNAGRIP PRODUCTS ON-LINE!

Contact Noel's Auto Parts for all your Quality DynaGrip / CarGo Products!
 

All Prices quoted are in AUS$ (incl. GST). Prices subject to change without notice..           

Postal address : 366 Edward Street, Wagga Wagga NSW 2650 Australia

Telephone : 02 6925 3777    International : +61 2 6925 3777

General Information / Orders : sales@noelsautoparts.com.au
Send mail to shane@noelsautoparts.com.au with questions or comments about this web site.
Copyright © 2013 Noel Comerford's Auto Parts & Accessories